Categories
Forex Assets

How Expensive Is It To Trade The CHF/SAR Forex Exotic Pair?

Introduction

CHF/SAR is the acronym for the Swiss Franc against the Saudi Riyal. It is classed as an exotic currency pair as it usually has moderate trading volume. In this case, the Swiss Franc (on the left) is the base currency, and the Saudi Riyal (on the right) is the quote currency. The SAR (Saudi Riyal) is the official currency of Saudi Arabia, and one SAR is divided into 100 halalas.

Understanding CHF/SAR

To find out the comparative value of one currency, we require an additional currency to compare. If the base currency’s value goes down, the value of the quote currency moves up and contrariwise. If the market cost of this pair is 4.0742, then this amount of SAR is required to buy one unit of CHF.

Spread

Forex brokers have two distinct prices for currency pairs, which are classified as the bid and ask price. The bid price is the offering price, and ask is the buy price. The distinction between the ask and the bid price is known as the spread. The spread is how brokers make their income. Below are the spreads for CHF/SAR currency pairs in both ECN & STP brokers.

ECN: 9 pips | STP: 14 pips

Fees

A Fee is basically the compensation we pay to the broker each time we execute a spot. There is no compensation charged on STP account models, but a few additional pips are charged on ECN accounts.

Slippage

Slippage refers to the distinction between the trader’s anticipated price and the original price at which the trade is executed. It can occur at any time but often occurs when the market is fast-phased and volatile. Also, sometimes slippage occurs when we place a large number of orders at the same time.

Trading Range in CHF/SAR

The amount of money we will earn or lose in a specific timeframe can be evaluated using the trading range table. It is an illustration of the minimum, average, and maximum pip movement in a currency pair. This can be assessed simply by using the ART indicator with 200-period SMA. 

Procedure to assess Pip Ranges

  1. Add the ATR indicator to your chart
  2. Set the period to 1
  3. Add a 200-period SMA to this indicator
  4. Shrink the chart so you can assess a large time period
  5. Select your desired timeframe
  6. Measure the floor level and set this value as the min
  7. Measure the level of the 200-period SMA and set this as the average
  8. Measure the peak levels and set this as Max.

CHF/SAR Cost as a Percent of the Trading Range

The cost of trade widely varies on the broker and differs based on the volatility of the market. This is because the total cost also includes slippage and spreads, excluding the trading fee. Below is the interpretation of the cost variation in terms of percentages. The understanding of it is discussed in the subsequent sections.

ECN Model Account

Spread = 9 | Slippage = 5 |Trading fee = 8

Total cost = Slippage + Spread + Trading Fee = 5 + 9 + 8 = 22

STP Model Account

Spread = 14 | Slippage = 5 | Trading fee = 0

Total cost = Slippage + Spread + Trading Fee = 5 + 14 + 0 = 19

The ideal way to trade the CHF/SAR

The CHF/SAR is an exotic-cross currency pair, and it is volatile. For example, the average pip movement on the 1H timeframe for this pair is ~37pips. From the earlier tables, it is clear that the higher the volatility, the lower is the cost of the trade. Nevertheless, this is not an added benefit, as it is risky to trade when the markets are incredibly volatile.

Trading in such timeframes will ensure low expenses just as reduced liquidity. It will also involve fewer costs by placing orders using limit/pending orders instead of market orders. This will substantially reduce the total cost with slippage being zero.

STP Model Account (Using Limit Orders)

Spread = 14 | Slippage = 0 | Trading fee = 0

Total cost = Slippage + Spread + Trading Fee = 0 + 14 + 0 = 14

While reading the above tables, if the ratios are larger, more significant are the trade costs. Likewise, if the proportions are small, lower are the costs. This can be inferred as the trading costs are more significant for low volatile markets and smaller for high volatile markets. I hope this article will support you to trade this pair in a much efficient way. Cheers!

Categories
Forex Assets

Analyzing The GBP/SAR Exotic Currency Pair

Introduction

In the Forex market, currencies are traded in pairs, and one currency is always quoted against the other. The abbreviation of GBP/SAR is British Pound Saudi Riyal. Here, the first currency GBP is the base currency, and the second one SAR is the quote currency.

Understanding GBP/SAR

We compare the value of one currency to another, and hence when we buy a currency pair, we are essentially buying the base currency and selling the quote currency. The market value of GBP/SAR determines the strength of SAR against the GBP, so if the exchange rate for the pair GBP/SAR is 4.7167, it means we need 4.7167 SAR to buy 1 GBP.

Spread

Trading the Forex market usually does not involve in spending a lot of commissions like the Stock market. Here, Forex brokers make a profit through spreads. The difference between the Bid and the Ask prices of an asset is called the spread. Some broker has the cost inbuilt into the buy and sell prices of the currency pair we want to trade instead of charging a separate fee. Below are the spread values of ECN and STP brokers for the GBP/SAR pair.

ECN: 40 pips | STP: 44 pips

Fees

A Fee is simply the charges we pay to the broker for executing a particular trade. The fee varies from the type of broker we use. For example, the fee on the STP account model is zero, but we can expect a few pips on ECN accounts.

Slippage

Slippage is the implementation of a trade at a price different from that requested by a trader. Slippage can either be positive (be additional profit) or negative (additional loss) and Mostly occurs when the market is volatile.

Trading Range in GBP/SAR

The trading range is used here is to measure the volatility of the GBP/SAR pair. The amount of money we will win or lose in a given amount of time can be assessed using the trading range table. The minimum, average, and maximum pip movement of the currency pair is represented in the trading range. This can be evaluated simply by using the ATR indicator combined with 200-period SMA.

Procedure to assess Pip Ranges

  1. Add the ATR indicator to your chart
  2. Set the period to 1
  3. Add a 200-period SMA to this indicator
  4. Shrink the chart so you can assess a significant period
  5. Select your desired timeframe
  6. Measure the floor level and set this value as the min
  7. Measure the level of the 200-period SMA and set this as the average
  8. Measure the peak levels and set this as Max.

GBP/SAR Costs as a Percent of the Trading Range

The cost of trade depends on the broker and differs according to the volatility of the market. This is because the trading cost includes slippage, fees, and the spread. The cost of variation in terms of percentage is given below. We will look into both the ECN model and the STP model.

ECN Model Account

Spread = 40 | Slippage = 3 |Trading fee = 5

Total cost = Slippage + Spread + Trading Fee = 3 + 40 + 5 = 48

STP Model Account

Spread = 44| Slippage = 3 | Trading fee = 0

Total cost = Slippage + Spread + Trading Fee = 3 + 44 + 0 = 47

Trading the GBP/SAR Forex pair

The GBP/SAR is an exotic-cross currency pair and is a low volatile market. Looking at the pip range table, the average pip movement on the 1H timeframe is only 62 pips. Hence, The volatility of this currency pair is on the lower side. We know that the higher the volatility, the lower will be the cost to execute the trade. However, this is not an advantage as trading in a volatile market involves more risk.

Let’s take, for example, in the 1M time frame, the Maximum pip range value is 3952, and the minimum is 896. When we compare the trading fees for both the pip movements, we note that for 896pip movement fess is 5.36%, and for 3952pip movement, fess is only 1.21%. As we can conclude from the above example, trading the GBP/SAR currency pair will be a bit expensive.