Categories
Forex Assets

Everything You Should Know To Trade The GBP/USD Forex Pair

Introduction

Currency pairs are classified as major, minor, exotic, etc. Major currencies pairs are those pairs that involve the US dollar as one of the currencies. These currencies typically have high liquidity and volatility. GBPUSD is one such example. It is the currency pair where Great Britain Pound is traded against the US dollar.

In this article, we shall be covering all the basic fundamentals which are essential to know before trading this pair. And before getting into the specifications of this pair, let us first understand what actually the price of GBPUSD signifies.

In GBPUSD, GBP is the base currency, and USD is the quote currency. The value (price) of the pair determines the units of USD required to purchase one unit of GBP. For example, if the current value of GBPUSD is 1.3100, then the trader must possess the US $1.3100 to buy 1 Pound.

GBP/USD Specification

Spread

Spread is simply the difference between the bid price and the ask price. The spread depends on the type of account.

Spread on ECN: 0.7

Spread on STP: 1.3

Fees

Again, the fee depends on the type of account. Typically, there is no fee charged by STP accounts. There is a trading fee on ECN account, which depends from broker to broker.

Slippage

Forex is very liquid and volatile. Hence, this causes slippage. Slippage is the difference between the price requested by the trader and the actual price the trader received. And this depends on the broker’s execution speed and volatility of the market. The slippage in major currency pairs is usually within 0.5 and 5 pips.

Trading Range in GBPUSD

As a trader, it is vital to know the number of pips a currency pair moves in a period of time. This is basically the volatility in the currency pair. And volatility is one of the factors which are helpful in risk management.

The volatility is measured in terms of percentage or pips. For example, if the volatility on the 1H timeframe of GBPUSD is 15 pips, then one can expect to gain or lose $150 (15 pip x $10 per pip) within a time period of few fours.

Below is a table that depicts the minimum, average, and maximum volatility (pip movement) on different timeframes.

EUR/USD PIP RANGES

Procedure to assess Pip Ranges

  1. Add the ATR indicator to your chart
  2. Set the period to 1
  3. Add a 200-period SMA to this indicator
  4. Shrink the chart so you can assess a large time period
  5. Select your desired timeframe
  6. Measure the floor level and set this value as the min
  7. Measure the level of the 200-period SMA and set this as the average
  8. Measure the peak levels and set this as Max.

(originally posted in our article here)

GBPUSD Cost as a Percent of the Trading Range

A Forex broker usually levies three type of charges for each trade. They are:

  • Slippage
  • Spread
  • Trading Fee

The sum of all the three costs will generate the total trading cost for one trade.

Total cost = Slippage + Spread + Trading Fee

Note: All costs are in terms of pips.

To bring up an application to the above volatility table, we bind these values with the total cost and find the cost variations (in terms of percentages) on different timeframes. And these percentages prove to be helpful in choosing the right timeframe with minimal costs.

ECN Model Account

Spread = 0.7 | Slippage = 2 | Trading fee = 1

Total cost = Slippage + Spread + Trading Fee = 2 + 0.7 + 1

Total cost = 3.7

STP Model Account

Spread = 1.3 | Slippage = 2 | Trading fee = 0

Total cost = Slippage + Spread + Trading Fee = 2 + 1.3 + 0

Total cost = 3.3

The Ideal Timeframe to Trade GBPUSD

Above are tables that illustrate the cost ranges in terms of percentage. Let us now comprehend the tables and figure out the ideal timeframe to trade this currency pair. From the above table, it is evident that the cost is highest (74% and 66%) in the 1H timeframe when the volatility is low. Hence, it is not ideal to pick the 1H timeframe when the volatility is around 5 pips (minimum).

On the flip side of things, the cost percentages are minimal on the 1M timeframe. Traders with a long term perspective on the market can invest with minimum costs.

Intraday traders, on the other hand, can pick the 1H, 2H, 4H, or the 1D timeframe when the volatility of the market is above average.

Another point to consider is that slippage eats up the costs significantly. So, it is recommended to plan strategies that involve placing of limit orders and not market orders.

As proof, below is a table that clearly shows the reduction in the cost percentages when the slippage is made NIL.

Total cost = Slippage + Spread + Trading fee = 0 + 0.7 + 1

Total cost = 1.7

Comparing these values to the table with slippage=2, it can be ascertained that the cost percentage has reduced by a considerable amount. Hence, all in all, it is ideal to trade by placing limit orders rather than executing at the market price.

Categories
Forex Assets

All you need before trading the EUR/USD Pair

The EUR/USD pair tracks the exchange rate of the Euro against the US Dollar. Since this pair represents a combination of the two stronger economies in the world, it is the most traded asset in Forex, and, therefore, the one with higher liquidity and less spread and slippage.

The value assigned represents how many US dollars are needed to buy a single EUR. That is, the quote is presented as 1 euro per x US dollars. For example, the current value is 1.1079, which means a trader needs to use 1.1079 dollars for every Euro he is willing to buy.

EUR/USD SPECIFICATIONS

LOT SIZE 100,000 EUR
MAGIN CURR. EUR
DIGITS 5
PIP VALUE $10
MIN TRADE SIZE 0.01 LOTS
MAX TRADE SIZE 1000 LOTS
AVERAGE 24H  VOLUME $575 BILLION

 

Spread

Spread is the difference between the bid and the ask prices. The EUR/USD spread varies depending on the account type. 

ECN: 0.3 pip

STP: 1 pip

Fees

The broker charges a fee per lot on ECN accounts, and usually, no fee on STP accounts The usual fee on an STP broker is from 6 to 10 pips per round trip and lot. Other

Slippage: Slippage is the difference between the trader’s intended price and the real price he received from the broker. It depends on the current volatility at the moment of the order. Slippage can be in favor of or against the trader.

Depending on the broker’s execution speed, slippage can be as low as 0.5pip or as high as 3 pips. 

Note:  Slippage happens twice: At the open and the close of a position.

Trading Ranges:

The following trading range tables measure the min, average, and max volatility of the asset at different timeframes.  Range figures usually multiply by the square root of two for every doubling of the timframe. That is, if the hourly timeframe volatility is 1, its 2h timeframe will show 1.41 on the same date. Trading ranges are useful tools to assess the risk. If the hourly volatility of the EURUSD is 20 pips, it means a potential $200 gain or loss in an hourly time span ( 20 pips + $10 value per pip).

The values shown depict ranges occurring at the moment of the creation of this document. The trader should assess the actual values at the moment of his trading activity.

        EUR/USD PIP RANGES  

MIN AVERAGE MAX
1H 5.9 10.4 26
2H 8.5 14.5 37
4H 13 22.1 49
D 45 64 114
W 119 160 210
M 290 537 918

  

Procedure to assess Pip Ranges

  1. Add the ATR indicator to your chart
  2. Set the period to 1
  3. Add a 200-period SMA to this indicator
  4. Shrink the chart so you can assess a large time period
  5. Select your desired timeframe
  6. Measure the floor level and set this value as the min
  7. Measure the level of the 200-period SMA and set this as the average
  8. Measure the peak levels and set this as Max.

EURUSD Cost as a percent of the Trading Range

To compute the costs, we add the trading fee, an average slippage value x 2 converted to pips, and we calculate what percent represents the min, average, and max of the ranges, assuming a range represents the amount of potential profit for one unit of time.

ECN MODEL ACCOUNT

ECN MIN AVERAGE MAX
Total 3.3 1H 55.93% 31.73% 12.69%
Slippage 2 2H 38.82% 22.76% 8.92%
Spread 0.3 4H 25.38% 14.93% 6.73%
Trading_Fee 1 D 7.33% 5.16% 2.89%
W 2.77% 2.06% 1.57%
M 1.14% 0.61% 0.36%

 

STP MODEL ACCOUNT

STP MIN AVERAGE MAX
Total 3.5 1H 59.32% 33.65% 13.46%
Slippage 2 2H 41.18% 24.14% 9.46%
Spread 1.5 4H 26.92% 15.84% 7.14%
Trading_Fee 0 D 7.78% 5.47% 3.07%
W 2.94% 2.19% 1.67%
M 1.21% 0.65% 0.38%

 

Best EUR/USD timeframe for trading

From the above charts, we see that hourly charts show a very high cost on entries with low volatility ( the Min column) therefore to trade these timeframes, traders need to spot the surges in volatility and be right most of the time to compensate for the 50%+ costs.

Intraday traders’ best timeframe is, definitively 4H, although the should optimize the costs using proper assessment of the volatility.

In both cases, strategies that take away slippage using limit orders would dramatically reduce costs and improve the results.

As an example, these are the results if we take away slippage using limit orders in entries and exits on an ECN account.

ECN MIN AVERAGE MAX
Total 1.3 1H 22.03% 12.50% 5.00%
Slippage 0 2H 15.29% 8.97% 3.51%
Spread 0.3 4H 10.00% 5.88% 2.65%
Trading_Fee 1 D 2.89% 2.03% 1.14%
W 1.09% 0.81% 0.62%
M 0.45% 0.24% 0.14%

 

We can see a percentual reduction of over 50% in costs, compared to market orders with slippage.

Categories
Forex Basics

Supply, Demand and Liquidity as Drivers of Prices

Markets are “places” where people and institutions exchange assets. It may be stock shares, commodities, grain, livestock, or currencies, but all markets behave similarly. Buyers and sellers look for the best possible price. A buyer seeks to buy at the cheapest possible price, while the seller wants to sell at the highest price.

How prices move

If we order buyers and sellers by the price they are willing to accept, we could see some buyers are bidding an amount very close to the price sellers are asking, and from there, the distance grows in a kind funnel-like shape.

For a sell to occur, one of them must cross the bridge and accept the other side’s price. Also, when a seller moves and takes the ask price for the first time, the “Last price” moves down a little. If another seller does the same, there might be other buyers willing to buy at the same level or not. If there are more buyers at that level, the next seller who takes the ask does not create an additional downward movement. If all buyers disappear from this level, the seller should accept a worse price, moving the asset down, or hold until a buyer takes his bid.

Conversely, if a buyer takes a bid price for the first time, the price of the asset moves up. If other buyers get in and deplete this level from sellers, they should buy at higher prices or wait till a seller takes his ask price.

Supply and Demand

Demand

The demand for an asset decreases as the price increases. The rate of that decline depends on the need for the asset and also on the perceived future value of the asset.

Supply

The supply increases as the price increases. The rate of increment depends mostly on the sellers’ belief about the future price growth of the security.

Equilibrium

Supply and demand are what drives prices up and down. If there are an equal number of buyers and sellers, the price stays at one level and is said to be in equilibrium.

When there are more buyers than sellers, the price moves up until a new equilibrium is reached. Conversely, if the number of sellers is higher, the price moves down until sellers and buyers get the new equilibrium.

Fair Price

The equilibrium is the result of a consensus about the fair price of the security, but fair price changes with the passage of time. The change in fair price may come from technical factors ( overbought-oversold levels, pivot points, breakouts), economic reports such as interest rates, GDP, manufacturing, nonfarm Payrolls, and inflation, or unexpected news events. The new price does not manifest itself in a single and swift price movement because that price is not known at the time. That’s the reason for the appearance of trends.

Liquidity

Liquidity is the term used to define the number of buyers and sellers present in the market.

In a very liquid market, the number of buyers and sellers is vast. Large-sized orders do not affect the price much. Also, bid and ask prices get closer to each other because buyers and sellers compete among themselves to offer their best bid and ask prices. That means spread tightens.

A market with low liquidity shows a scarcity of buyers and sellers. The size and number of operations are tiny, and one small order can produce significant price variations up or down. Also, usually, spreads widen because there is less competition among participants. Low liquidity may cause market manipulations since it is easy to drive prices up or down.

Liquidity does not depend only on the market in question. It changes with the time of the day. For instance, the EURUSD shows less liquidity during the Tokyo session. Then it grows when the European exchanged opens, and it maximizes at the open of the US session. Finally, it fades after Europe closes its markets and traded volume declines further after the US closes.

Final words

  • Supply and demand drive the prices up or down until an equilibrium is reached.
  • The equilibrium breaks by a change in the perception of value by the parties trading it.
  • High liquidity is the key factor for tightening spreads and making markets flow without price manipulation.